RC1 Block 044Official Factory User Manual

OptiFabric AI User Manual

OptiFabric AI ব্যবহার নির্দেশিকা

Official bilingual operating guidance for Cutting Masters, Cutting Supervisors, Production Officers and Factory Managers.

Cutting Master, Cutting Supervisor, Production Officer এবং Factory Manager-এর জন্য official bilingual operating guidance।

Prefer a single language? English only · শুধু বাংলা

Important Engineering Rule

গুরুত্বপূর্ণ ইঞ্জিনিয়ারিং নিয়ম

OptiFabric AI provides engineering support and recommendations. Physical pattern checking, trial cutting and authorised factory approval remain mandatory before bulk production.

OptiFabric AI engineering support এবং recommendation প্রদান করে। Bulk production-এর আগে physical pattern checking, trial cutting এবং authorised factory approval বাধ্যতামূলক।

Factory Role

Cutting Master

কাটিং মাস্টার

Primary Responsibility

Prepare accurate pattern information, trace pattern boundaries and review AI marker recommendations before cutting.

প্রধান দায়িত্ব

সঠিক প্যাটার্ন তথ্য প্রস্তুত করা, প্যাটার্নের সীমানা ট্রেস করা এবং কাটিংয়ের আগে AI marker recommendation যাচাই করা।

01

Pattern Photo Preparation

প্যাটার্নের ছবি প্রস্তুত করা

/optifabric/cutting-assistant/upload

Purpose

উদ্দেশ্য

English

Prepare a clear pattern image that the application can use for engineering measurement.

বাংলা

এমন একটি পরিষ্কার প্যাটার্নের ছবি প্রস্তুত করা, যা অ্যাপ্লিকেশন engineering measurement-এর জন্য ব্যবহার করতে পারে।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

AI needs a clear top-down image and a known measurement reference to calculate the real pattern size.

বাংলা

প্যাটার্নের বাস্তব মাপ গণনা করার জন্য AI-এর পরিষ্কার উপর থেকে তোলা ছবি এবং পরিচিত measurement reference প্রয়োজন।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Place one pattern piece on a clean, flat and contrasting background.

2

Place a 12-inch ruler or 30-centimetre scale beside the pattern.

3

Keep the ruler and pattern on the same flat surface.

4

Take the photograph directly from above.

5

Ensure the entire pattern and ruler are visible.

6

Check that there is no shadow, fold or obstruction.

বাংলা

1

একটি প্যাটার্ন পিস পরিষ্কার, সমতল এবং বিপরীত রঙের background-এর ওপর রাখুন।

2

প্যাটার্নের পাশে ১২ ইঞ্চি ruler অথবা ৩০ centimetre scale রাখুন।

3

Ruler এবং pattern একই সমতল স্থানে রাখুন।

4

ছবিটি একেবারে উপর থেকে তুলুন।

5

সম্পূর্ণ প্যাটার্ন এবং ruler যেন ছবিতে দেখা যায় তা নিশ্চিত করুন।

6

ছবিতে shadow, fold অথবা কোনো বাধা আছে কি না পরীক্ষা করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A complete and clearly visible pattern image suitable for calibration and tracing.

বাংলা

Calibration এবং tracing-এর উপযোগী সম্পূর্ণ ও পরিষ্কার প্যাটার্ন ছবি।

Common Mistakes

সাধারণ ভুল

English

•

Taking the photograph from an angle.

•

Using a ruler that is partly hidden.

•

Including more than one overlapping pattern piece.

•

Using a background similar to the pattern colour.

•

Cutting off part of the pattern in the photograph.

বাংলা

•

কোণ থেকে ছবি তোলা।

•

আংশিক ঢাকা ruler ব্যবহার করা।

•

একাধিক overlapping pattern piece রাখা।

•

প্যাটার্নের মতো একই রঙের background ব্যবহার করা।

•

ছবিতে প্যাটার্নের কিছু অংশ বাদ পড়ে যাওয়া।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Use strong, even lighting.

•

Use one photograph for each pattern piece.

•

Use a white background for dark patterns.

•

Check image sharpness before uploading.

বাংলা

•

পর্যাপ্ত ও সমান আলো ব্যবহার করুন।

•

প্রতিটি pattern piece-এর জন্য আলাদা ছবি ব্যবহার করুন।

•

গাঢ় রঙের প্যাটার্নের জন্য সাদা background ব্যবহার করুন।

•

Upload করার আগে ছবির sharpness পরীক্ষা করুন।

02

Upload Pattern

প্যাটার্ন আপলোড

/optifabric/cutting-assistant/upload

Purpose

উদ্দেশ্য

English

Upload the prepared pattern image or document into the OptiFabric workflow.

বাংলা

প্রস্তুত করা প্যাটার্নের ছবি অথবা document OptiFabric workflow-তে upload করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

The uploaded file is the engineering source used for scale calibration, tracing and area calculation.

বাংলা

Upload করা file scale calibration, tracing এবং area calculation-এর engineering source হিসেবে ব্যবহৃত হয়।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Open the Upload Your Pattern screen.

2

Select the required fabric or pattern category when available.

3

Choose a PDF, JPG, JPEG or PNG file.

4

Review the AI photo-quality guidance.

5

Confirm that the correct file has been selected.

6

Continue to the tracing workflow.

বাংলা

1

Upload Your Pattern screen খুলুন।

2

প্রয়োজন হলে fabric অথবা pattern category নির্বাচন করুন।

3

PDF, JPG, JPEG অথবা PNG file নির্বাচন করুন।

4

AI photo-quality guidance পড়ুন।

5

সঠিক file নির্বাচন করা হয়েছে কি না নিশ্চিত করুন।

6

Tracing workflow-তে এগিয়ে যান।

Expected Result

প্রত্যাশিত ফলাফল

English

The selected pattern is loaded and ready for engineering review.

বাংলা

নির্বাচিত প্যাটার্ন load হবে এবং engineering review-এর জন্য প্রস্তুত হবে।

Common Mistakes

সাধারণ ভুল

English

•

Uploading the wrong pattern piece.

•

Uploading a blurred or compressed image.

•

Using an unsupported file format.

•

Continuing without checking the ruler.

বাংলা

•

ভুল pattern piece upload করা।

•

Blurred অথবা অতিরিক্ত compressed ছবি upload করা।

•

Unsupported file format ব্যবহার করা।

•

Ruler পরীক্ষা না করে পরবর্তী ধাপে যাওয়া।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Use clear file names such as Shirt-Front-Medium.

•

Keep the original image safely stored.

•

Confirm the style number and pattern-piece name.

বাংলা

•

Shirt-Front-Medium-এর মতো পরিষ্কার file name ব্যবহার করুন।

•

Original image নিরাপদে সংরক্ষণ করুন।

•

Style number এবং pattern-piece name নিশ্চিত করুন।

03

Boundary Tracing and Calibration

বাউন্ডারি ট্রেসিং ও ক্যালিব্রেশন

/optifabric/cutting-assistant/pattern-analysis

Purpose

উদ্দেশ্য

English

Mark the outer boundary of the pattern and convert image measurements into real engineering dimensions.

বাংলা

প্যাটার্নের বাইরের সীমানা চিহ্নিত করা এবং ছবির measurement-কে বাস্তব engineering dimension-এ রূপান্তর করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

AI needs boundary points to construct the pattern polygon and the ruler length to convert pixels into real measurements.

বাংলা

Pattern polygon তৈরির জন্য AI-এর boundary point এবং pixel-কে বাস্তব measurement-এ রূপান্তরের জন্য ruler length প্রয়োজন।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Confirm that the pattern image is displayed correctly.

2

Set or verify the ruler calibration.

3

Click around the outer edge of the pattern.

4

Add extra points around curves and corners.

5

Avoid placing points inside the pattern.

6

Close the polygon by connecting the final point to the starting point.

7

Review the complete outline.

8

Reset and trace again when the outline is incorrect.

বাংলা

1

Pattern image সঠিকভাবে দেখা যাচ্ছে কি না নিশ্চিত করুন।

2

Ruler calibration নির্ধারণ অথবা যাচাই করুন।

3

প্যাটার্নের বাইরের edge বরাবর click করুন।

4

Curve এবং corner-এর স্থানে অতিরিক্ত point দিন।

5

প্যাটার্নের ভেতরে point দেওয়া এড়িয়ে চলুন।

6

শেষ point-কে শুরুর point-এর সঙ্গে যুক্ত করে polygon সম্পূর্ণ করুন।

7

সম্পূর্ণ outline পরীক্ষা করুন।

8

Outline ভুল হলে reset করে পুনরায় trace করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A closed engineering polygon representing the actual pattern boundary.

বাংলা

বাস্তব প্যাটার্ন boundary-এর প্রতিনিধিত্বকারী একটি সম্পূর্ণ engineering polygon।

Common Mistakes

সাধারণ ভুল

English

•

Using too few points around a curved edge.

•

Leaving the polygon open.

•

Tracing seam lines instead of the cutting edge.

•

Clicking outside the pattern.

•

Using an incorrect ruler calibration value.

বাংলা

•

Curve-এর চারপাশে খুব কম point ব্যবহার করা।

•

Polygon খোলা রেখে দেওয়া।

•

Cutting edge-এর পরিবর্তে seam line trace করা।

•

প্যাটার্নের বাইরে click করা।

•

ভুল ruler calibration value ব্যবহার করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Use more points for complex curves.

•

Zoom the browser when detailed tracing is required.

•

Trace the actual cutting boundary consistently.

•

Review the first and last point carefully.

বাংলা

•

Complex curve-এর জন্য বেশি point ব্যবহার করুন।

•

Detail tracing প্রয়োজন হলে browser zoom ব্যবহার করুন।

•

সবসময় actual cutting boundary trace করুন।

•

প্রথম ও শেষ point সতর্কভাবে পরীক্ষা করুন।

04

Polygon and Area Review

পলিগন ও এরিয়া যাচাই

/optifabric/cutting-assistant/marker-layout

Purpose

উদ্দেশ্য

English

Review the constructed pattern polygon and calculated pattern area.

বাংলা

তৈরি করা pattern polygon এবং calculated pattern area যাচাই করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

Pattern area is required to estimate material use and evaluate marker efficiency.

বাংলা

Material use অনুমান এবং marker efficiency মূল্যায়নের জন্য pattern area প্রয়োজন।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Review the displayed polygon shape.

2

Compare the polygon visually with the original pattern.

3

Check the calculated square-inch area.

4

Confirm that the ruler calibration is correct.

5

Return to tracing when the shape or area appears incorrect.

বাংলা

1

Display করা polygon shape পরীক্ষা করুন।

2

Original pattern-এর সঙ্গে polygon visually compare করুন।

3

Calculated square-inch area পরীক্ষা করুন।

4

Ruler calibration সঠিক কি না নিশ্চিত করুন।

5

Shape অথবা area ভুল মনে হলে tracing screen-এ ফিরে যান।

Expected Result

প্রত্যাশিত ফলাফল

English

A validated pattern shape and reasonable engineering-area result.

বাংলা

যাচাইকৃত pattern shape এবং যৌক্তিক engineering-area result।

Common Mistakes

সাধারণ ভুল

English

•

Accepting an obviously distorted polygon.

•

Ignoring an unrealistic area value.

•

Using the result without comparing it with the paper pattern.

বাংলা

•

স্পষ্টভাবে distorted polygon গ্রহণ করা।

•

অযৌক্তিক area value উপেক্ষা করা।

•

Paper pattern-এর সঙ্গে compare না করে result ব্যবহার করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Compare key dimensions with the physical pattern.

•

Repeat tracing when the area differs significantly.

•

Record the pattern name and size with the result.

বাংলা

•

Physical pattern-এর key dimension-এর সঙ্গে compare করুন।

•

Area উল্লেখযোগ্যভাবে ভিন্ন হলে পুনরায় tracing করুন।

•

Result-এর সঙ্গে pattern name এবং size লিখে রাখুন।

Factory Role

Cutting Supervisor

কাটিং সুপারভাইজার

Primary Responsibility

Verify marker inputs, cutting-room conditions and practical execution requirements.

প্রধান দায়িত্ব

Marker input, cutting-room condition এবং practical execution requirement যাচাই করা।

05

Fabric and Marker Information

কাপড় ও মার্কার তথ্য

/optifabric/cutting-assistant/marker-layout

Purpose

উদ্দেশ্য

English

Enter the available fabric width and marker information for layout evaluation.

বাংলা

Layout evaluation-এর জন্য available fabric width এবং marker information প্রদান করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

AI must know the usable fabric width and marker length to calculate available marker area and utilisation.

বাংলা

Available marker area এবং utilisation গণনার জন্য AI-এর usable fabric width এবং marker length জানা প্রয়োজন।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Confirm the actual usable fabric width.

2

Enter the marker length in the requested unit.

3

Select the correct fabric type when the option is available.

4

Confirm whether the fabric is solid, striped, checked or printed.

5

Review the displayed marker area.

6

Continue to AI nesting.

বাংলা

1

Actual usable fabric width নিশ্চিত করুন।

2

Requested unit অনুযায়ী marker length লিখুন।

3

Option থাকলে সঠিক fabric type নির্বাচন করুন।

4

Fabric solid, striped, checked অথবা printed কি না নিশ্চিত করুন।

5

Display করা marker area পরীক্ষা করুন।

6

AI nesting-এ এগিয়ে যান।

Expected Result

প্রত্যাশিত ফলাফল

English

Correct marker dimensions ready for pattern-placement analysis.

বাংলা

Pattern-placement analysis-এর জন্য সঠিক marker dimension প্রস্তুত হবে।

Common Mistakes

সাধারণ ভুল

English

•

Entering total fabric width instead of usable width.

•

Mixing inches and centimetres.

•

Ignoring selvage allowance.

•

Selecting solid fabric for a striped style.

বাংলা

•

Usable width-এর পরিবর্তে total fabric width লেখা।

•

Inch এবং centimetre মিশিয়ে ফেলা।

•

Selvage allowance উপেক্ষা করা।

•

Striped style-এর জন্য solid fabric নির্বাচন করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Measure usable width from the actual roll.

•

Check shade and fabric-lot information.

•

Confirm marker direction and grain requirements.

•

Record any fabric restriction before nesting.

বাংলা

•

Actual roll থেকে usable width মাপুন।

•

Shade এবং fabric-lot information পরীক্ষা করুন।

•

Marker direction এবং grain requirement নিশ্চিত করুন।

•

Nesting-এর আগে fabric restriction লিখে রাখুন।

06

AI Marker Layout Review

AI মার্কার লে-আউট যাচাই

/optifabric/cutting-assistant/marker-layout

Purpose

উদ্দেশ্য

English

Review the proposed placement of pattern pieces inside the marker.

বাংলা

Marker-এর মধ্যে proposed pattern-piece placement যাচাই করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

AI evaluates the empty spaces between pieces to estimate marker utilisation and potential fabric saving.

বাংলা

Marker utilisation এবং সম্ভাব্য fabric saving অনুমান করতে AI pattern piece-এর মধ্যকার empty space মূল্যায়ন করে।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Review whether all required pattern pieces are displayed.

2

Check that pieces remain inside the marker boundary.

3

Verify the grain direction.

4

Check one-way, nap, stripe and print restrictions.

5

Review spaces between pattern pieces.

6

Compare the AI arrangement with the existing factory marker.

7

Reject any arrangement that cannot be cut safely.

বাংলা

1

প্রয়োজনীয় সব pattern piece দেখানো হয়েছে কি না পরীক্ষা করুন।

2

Piece-গুলো marker boundary-এর মধ্যে আছে কি না দেখুন।

3

Grain direction যাচাই করুন।

4

One-way, nap, stripe এবং print restriction পরীক্ষা করুন।

5

Pattern piece-এর মধ্যকার space পরীক্ষা করুন।

6

Factory-এর existing marker-এর সঙ্গে AI arrangement compare করুন।

7

নিরাপদে কাটা সম্ভব নয় এমন arrangement বাতিল করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A practical marker proposal ready for engineering and production review.

বাংলা

Engineering এবং production review-এর জন্য একটি practical marker proposal।

Common Mistakes

সাধারণ ভুল

English

•

Accepting overlapping pieces.

•

Ignoring grain direction.

•

Rotating a one-way pattern incorrectly.

•

Ignoring knife clearance.

•

Using the demonstration layout as an automatic cutting instruction.

বাংলা

•

Overlapping piece গ্রহণ করা।

•

Grain direction উপেক্ষা করা।

•

One-way pattern ভুলভাবে rotate করা।

•

Knife clearance উপেক্ষা করা।

•

Demonstration layout-কে automatic cutting instruction হিসেবে ব্যবহার করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Verify every pattern piece before bulk cutting.

•

Maintain safe spacing for the selected cutting method.

•

Use trial cutting when the style is new.

•

Obtain Cutting Master approval.

বাংলা

•

Bulk cutting-এর আগে প্রতিটি pattern piece যাচাই করুন।

•

Selected cutting method অনুযায়ী safe spacing রাখুন।

•

নতুন style হলে trial cutting করুন।

•

Cutting Master-এর approval নিন।

07

Cutting Readiness Review

কাটিং প্রস্তুতি যাচাই

/optifabric/pilot-dashboard

Purpose

উদ্দেশ্য

English

Confirm whether the AI result is practically ready for a controlled factory trial.

বাংলা

AI result controlled factory trial-এর জন্য practically ready কি না নিশ্চিত করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

A mathematically efficient marker may still require operational checking for fabric behaviour, machine capacity and operator safety.

বাংলা

Mathematically efficient marker হলেও fabric behaviour, machine capacity এবং operator safety-এর জন্য operational checking প্রয়োজন হতে পারে।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Review the pattern and marker summary.

2

Confirm the fabric type and usable width.

3

Check whether spreading restrictions are recorded.

4

Confirm the expected number of layers.

5

Review cutting-machine capacity.

6

Check the operator skill requirement.

7

Authorise only a controlled trial before bulk cutting.

বাংলা

1

Pattern এবং marker summary পরীক্ষা করুন।

2

Fabric type এবং usable width নিশ্চিত করুন।

3

Spreading restriction record করা হয়েছে কি না দেখুন।

4

Expected layer number নিশ্চিত করুন।

5

Cutting-machine capacity পরীক্ষা করুন।

6

Operator skill requirement যাচাই করুন।

7

Bulk cutting-এর আগে শুধু controlled trial অনুমোদন করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A supervised trial-cutting decision with known risks and controls.

বাংলা

পরিচিত risk এবং control-সহ supervised trial-cutting decision।

Common Mistakes

সাধারণ ভুল

English

•

Starting bulk cutting without trial verification.

•

Ignoring fabric slippage.

•

Using excessive lay height.

•

Assigning an unsuitable machine or operator.

বাংলা

•

Trial verification ছাড়া bulk cutting শুরু করা।

•

Fabric slippage উপেক্ষা করা।

•

অতিরিক্ত lay height ব্যবহার করা।

•

অনুপযুক্ত machine অথবা operator নিয়োগ করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Use a small controlled trial lay.

•

Check top, middle and bottom plies.

•

Review cut accuracy before bulk approval.

•

Record any change made after the AI recommendation.

বাংলা

•

Small controlled trial lay ব্যবহার করুন।

•

Top, middle এবং bottom ply পরীক্ষা করুন।

•

Bulk approval-এর আগে cut accuracy যাচাই করুন।

•

AI recommendation-এর পরে করা পরিবর্তন record করুন।

Factory Role

Production Officer

প্রোডাকশন অফিসার

Primary Responsibility

Verify order, consumption and production-planning information before material commitments are made.

প্রধান দায়িত্ব

Material commitment-এর আগে order, consumption এবং production-planning information যাচাই করা।

08

Fabric Consumption Review (Legacy Demo)

কাপড়ের ব্যবহার যাচাই (Legacy Demo)

/optifabric/cutting-assistant/fabric-consumption

Purpose

উদ্দেশ্য

English

Review estimated marker efficiency, fabric utilisation and consumption using the legacy Cutting Assistant demo calculation — this does not use a project's saved Marker Run or Fabric Profile. For real project consumption, use Marker-Based Fabric Consumption in the Project → Marker workflow.

বাংলা

Legacy Cutting Assistant demo calculation ব্যবহার করে estimated marker efficiency, fabric utilisation এবং consumption যাচাই করা — এটি project-এর saved Marker Run বা Fabric Profile ব্যবহার করে না। Real project consumption-এর জন্য Project → Marker workflow-এ Marker-Based Fabric Consumption ব্যবহার করুন।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

AI compares pattern area with marker area to estimate utilisation, wastage and consumption.

বাংলা

Utilisation, wastage এবং consumption অনুমান করতে AI pattern area-এর সঙ্গে marker area compare করে।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Confirm the style and pattern-size information.

2

Confirm the order quantity and size ratio when available.

3

Review marker efficiency.

4

Review fabric utilisation and estimated wastage.

5

Check consumption per garment.

6

Check total estimated fabric requirement.

7

Compare the estimate with the factory plan.

বাংলা

1

Style এবং pattern-size information নিশ্চিত করুন।

2

Option থাকলে order quantity এবং size ratio নিশ্চিত করুন।

3

Marker efficiency পরীক্ষা করুন।

4

Fabric utilisation এবং estimated wastage পরীক্ষা করুন।

5

প্রতি garment-এর consumption পরীক্ষা করুন।

6

Total estimated fabric requirement পরীক্ষা করুন।

7

Factory plan-এর সঙ্গে estimate compare করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A reviewed engineering estimate suitable for planning discussion.

বাংলা

Planning discussion-এর উপযোগী একটি যাচাইকৃত engineering estimate।

Common Mistakes

সাধারণ ভুল

English

•

Using sample quantity instead of order quantity.

•

Ignoring size ratio.

•

Comparing different fabric widths.

•

Treating estimated consumption as final booking consumption.

বাংলা

•

Order quantity-এর পরিবর্তে sample quantity ব্যবহার করা।

•

Size ratio উপেক্ষা করা।

•

ভিন্ন fabric width compare করা।

•

Estimated consumption-কে final booking consumption হিসেবে গ্রহণ করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Compare AI estimates with approved CAD or historical data.

•

Add approved process allowances separately.

•

Record the fabric width used in each comparison.

•

Escalate large differences for engineering review.

বাংলা

•

Approved CAD অথবা historical data-এর সঙ্গে AI estimate compare করুন।

•

Approved process allowance আলাদাভাবে যোগ করুন।

•

প্রতিটি comparison-এ ব্যবহৃত fabric width record করুন।

•

বড় পার্থক্য engineering review-এর জন্য escalate করুন।

09

Fabric Saving and ROI Review

কাপড় সাশ্রয় ও ROI যাচাই

/optifabric/pilot-dashboard

Purpose

উদ্দেশ্য

English

Evaluate potential fabric saving and its commercial effect on the order.

বাংলা

সম্ভাব্য fabric saving এবং order-এর ওপর এর commercial effect মূল্যায়ন করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

AI needs current consumption, improved consumption, order quantity and fabric price to estimate possible commercial savings.

বাংলা

সম্ভাব্য commercial saving অনুমান করতে AI-এর current consumption, improved consumption, order quantity এবং fabric price প্রয়োজন।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Verify the current factory-consumption baseline.

2

Review the AI-improved consumption estimate.

3

Confirm the order quantity.

4

Confirm the fabric purchase price and currency.

5

Review the estimated total saving.

6

Separate estimated saving from confirmed saving.

7

Submit the result for management review.

বাংলা

1

Current factory-consumption baseline যাচাই করুন।

2

AI-improved consumption estimate পরীক্ষা করুন।

3

Order quantity নিশ্চিত করুন।

4

Fabric purchase price এবং currency নিশ্চিত করুন।

5

Estimated total saving পরীক্ষা করুন।

6

Estimated saving এবং confirmed saving আলাদা রাখুন।

7

Management review-এর জন্য result submit করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A transparent savings estimate supported by verified commercial inputs.

বাংলা

যাচাইকৃত commercial input-সহ একটি transparent savings estimate।

Common Mistakes

সাধারণ ভুল

English

•

Using an outdated fabric price.

•

Using unverified factory consumption.

•

Presenting projected savings as already achieved.

•

Ignoring additional process losses.

বাংলা

•

পুরোনো fabric price ব্যবহার করা।

•

Unverified factory consumption ব্যবহার করা।

•

Projected saving-কে already achieved হিসেবে উপস্থাপন করা।

•

Additional process loss উপেক্ষা করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Use the latest approved fabric price.

•

Clearly label all assumptions.

•

Verify savings through an actual production trial.

•

Report both percentage and financial value.

বাংলা

•

সর্বশেষ approved fabric price ব্যবহার করুন।

•

সব assumption পরিষ্কারভাবে উল্লেখ করুন।

•

Actual production trial-এর মাধ্যমে saving যাচাই করুন।

•

Percentage এবং financial value উভয়ভাবে report করুন।

Factory Role

Factory Manager

ফ্যাক্টরি ম্যানেজার

Primary Responsibility

Approve pilots, evaluate commercial benefits and ensure controlled implementation.

প্রধান দায়িত্ব

Pilot approve করা, commercial benefit মূল্যায়ন করা এবং controlled implementation নিশ্চিত করা।

10

Complete Pilot Result

সম্পূর্ণ পাইলট ফলাফল

/optifabric/pilot-dashboard

Purpose

উদ্দেশ্য

English

Review the complete engineering and commercial outcome of the OptiFabric trial.

বাংলা

OptiFabric trial-এর সম্পূর্ণ engineering এবং commercial outcome যাচাই করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

Management needs a combined view of marker performance, consumption, saving potential and operational risk before approving expansion.

বাংলা

Expansion approve করার আগে management-এর marker performance, consumption, saving potential এবং operational risk-এর combined view প্রয়োজন।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Review the style and factory information.

2

Review the pattern and marker results.

3

Check marker efficiency and estimated wastage.

4

Review consumption and financial saving.

5

Confirm that trial cutting was completed.

6

Review any difference between AI estimate and actual result.

7

Approve, revise or reject the proposed implementation.

বাংলা

1

Style এবং factory information পরীক্ষা করুন।

2

Pattern এবং marker result পরীক্ষা করুন।

3

Marker efficiency এবং estimated wastage যাচাই করুন।

4

Consumption এবং financial saving পরীক্ষা করুন।

5

Trial cutting সম্পন্ন হয়েছে কি না নিশ্চিত করুন।

6

AI estimate এবং actual result-এর পার্থক্য পরীক্ষা করুন।

7

Proposed implementation approve, revise অথবা reject করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A management decision based on engineering evidence and verified trial results.

বাংলা

Engineering evidence এবং verified trial result-এর ভিত্তিতে management decision।

Common Mistakes

সাধারণ ভুল

English

•

Approving expansion using demonstration data only.

•

Ignoring operational feedback from the cutting room.

•

Reviewing only financial saving and not quality risk.

•

Failing to assign responsibility for implementation.

বাংলা

•

শুধু demonstration data ব্যবহার করে expansion approve করা।

•

Cutting room-এর operational feedback উপেক্ষা করা।

•

Quality risk বাদ দিয়ে শুধু financial saving দেখা।

•

Implementation-এর দায়িত্ব নির্ধারণ না করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Require one verified pilot before wider rollout.

•

Include Cutting, Production, Quality and Industrial Engineering.

•

Approve measurable targets.

•

Review actual savings after production completion.

বাংলা

•

Wider rollout-এর আগে একটি verified pilot বাধ্যতামূলক করুন।

•

Cutting, Production, Quality এবং Industrial Engineering-কে অন্তর্ভুক্ত করুন।

•

Measurable target approve করুন।

•

Production completion-এর পরে actual saving review করুন।

11

Factory Pilot Approval

ফ্যাক্টরি পাইলট অনুমোদন

/optifabric/pilot-dashboard

Purpose

উদ্দেশ্য

English

Control how OptiFabric AI is introduced into factory operations.

বাংলা

Factory operation-এ OptiFabric AI কীভাবে চালু হবে তা নিয়ন্ত্রণ করা।

Why Does AI Ask for This?

AI কেন এই তথ্য চায়?

English

Controlled implementation protects fabric, production quality, delivery performance and customer commitments.

বাংলা

Controlled implementation fabric, production quality, delivery performance এবং customer commitment রক্ষা করে।

Step-by-Step Operation

ধাপে ধাপে পরিচালনা

English

1

Select one suitable pilot style.

2

Assign a responsible Cutting Master.

3

Assign a Cutting Supervisor and Production Officer.

4

Record the existing marker and consumption baseline.

5

Run OptiFabric analysis.

6

Complete a controlled trial cut.

7

Measure the actual outcome.

8

Approve the next pilot only after documented review.

বাংলা

1

একটি উপযুক্ত pilot style নির্বাচন করুন।

2

একজন responsible Cutting Master নিয়োগ করুন।

3

একজন Cutting Supervisor এবং Production Officer নিয়োগ করুন।

4

Existing marker এবং consumption baseline record করুন।

5

OptiFabric analysis সম্পন্ন করুন।

6

Controlled trial cut করুন।

7

Actual outcome measure করুন।

8

Documented review-এর পরে পরবর্তী pilot approve করুন।

Expected Result

প্রত্যাশিত ফলাফল

English

A controlled, measurable and commercially accountable factory pilot.

বাংলা

একটি controlled, measurable এবং commercially accountable factory pilot।

Common Mistakes

সাধারণ ভুল

English

•

Selecting a highly complex style for the first pilot.

•

Failing to record the original baseline.

•

Changing multiple production conditions during comparison.

•

Rolling out before the pilot report is approved.

বাংলা

•

প্রথম pilot-এর জন্য অত্যন্ত complex style নির্বাচন করা।

•

Original baseline record না করা।

•

Comparison-এর সময় একাধিক production condition পরিবর্তন করা।

•

Pilot report approve হওয়ার আগে rollout করা।

Best Practices

সর্বোত্তম পদ্ধতি

English

•

Begin with a simple solid-fabric style.

•

Use the same fabric width for comparison.

•

Keep signed pilot records.

•

Review quality, productivity and saving together.

বাংলা

•

Simple solid-fabric style দিয়ে শুরু করুন।

•

Comparison-এর জন্য একই fabric width ব্যবহার করুন।

•

Signed pilot record সংরক্ষণ করুন।

•

Quality, productivity এবং saving একসঙ্গে review করুন।

Factory Pilot Checklist

ফ্যাক্টরি পাইলট চেকলিস্ট

Complete every item before approving the pilot result.

Pilot result approve করার আগে প্রতিটি item সম্পন্ন করুন।

1

Approved pilot style selected

Approved pilot style নির্বাচন করা হয়েছে

2

Pattern images prepared correctly

Pattern image সঠিকভাবে প্রস্তুত করা হয়েছে

3

12-inch ruler or 30-centimetre scale visible

১২ ইঞ্চি ruler অথবা ৩০ centimetre scale দেখা যাচ্ছে

4

Pattern boundary checked by Cutting Master

Cutting Master pattern boundary যাচাই করেছেন

5

Usable fabric width confirmed

Usable fabric width নিশ্চিত করা হয়েছে

6

Existing factory marker recorded

Existing factory marker record করা হয়েছে

7

Current consumption baseline approved

Current consumption baseline approve করা হয়েছে

8

AI marker result reviewed

AI marker result review করা হয়েছে

9

Controlled trial cutting completed

Controlled trial cutting সম্পন্ন হয়েছে

10

Actual result compared with AI estimate

Actual result AI estimate-এর সঙ্গে compare করা হয়েছে

11

Factory Manager approval recorded

Factory Manager approval record করা হয়েছে

Expected Factory Outcome

প্রত্যাশিত ফ্যাক্টরি ফলাফল

The factory should complete the OptiFabric pilot with verified pattern information, a reviewed marker proposal, a controlled trial cut, measured consumption and a documented management decision.

Factory-কে verified pattern information, reviewed marker proposal, controlled trial cut, measured consumption এবং documented management decision-সহ OptiFabric pilot সম্পন্ন করতে হবে।